Publications

Journal Publications

Refereed Journal Publications

  • Shafiee, M., Hashemian, L., Rostami, A., Tabatabaee, N., and Bayat, A. (2016) "Field Measurement and Medeling of Vertical and Longitudinal Strains from Falling Weight Deflectometer Testing," Accepted, Journal of Transportation Engineering: Part B, Pavements.
  • Das, S., Bayat, A., Gay, L., Matthews, J. (2016) "Productivity Analysis of Lateral CIPP Rehabilitation Process Using Simphony Simulation Modelling," Accepted, ASCE Journal of Pipeline Systems.
  • Vaseli, H., Hashemian, L., Bayat, A., Gay, L., Williams, I., and Mezler, J. (2016) "Evaluation of Fiber Optic Installation Methods, A Case Study on Micro-Trenching in Alberta, Canada," Accepted, FACETS Journal.
  • Yi, Y., Kang, C., and Bayat, A. (2017) "Estiamtion of One-Dimensional Compression of Tire-Derived Aggregate Using a Simple Method," Accepted, International Journal of Geotechnical Engineering.
  • Asefzadeh, A., Hashemian, L., and Bayat, A. (2017) "Development of Statistical Temperature Prediction Models for a Test Road in Edmonton, Alberta, Canada," Published Online, International Journal of Pavement Research Technology (10.1016/j.ijprt.2017.05.004).
  • Hashemian, L. and Bayat, A. (2017) "Field Evaluation of Load-Bearing Capacity of Tire Fill Embankment Pavements," Accepted, Journal of Testing and Evaluation.
  • Rabiei, M., Yi, Y.L., Bayat, A., Cheng, R., and Osbak, M. (2017) "Estimation of Hydrokinetic Pressure and Fluidic Drag Changes during Pipe Installations via HDD Based on Identifying Slurry Flow Pattern Change within Borehole," Accepted, Journal of Pipeline Systems.
  • Rezaei, M., Hashemian, L., Huculak, B., and Bayat, A. (2016) "Investigation of Rutting Resistance and Moisture Damage of Cold Asphalt Mixes," Accepted, Journal of Materials in Civil Engineering.
  • Hashemian, L., Rezaei, M., and Bayat, A. "Field and Laboratory Investigations on Pavement Backfilling Material for Micro-Trenching in Cold Regions," Published Online, International Journal of Pavement Research and Technology (10.1016/j.ijprt.2017.03.010).
  • Alberto-Hernandez, Y., Kang, C., Yi, Y., and Bayat, A. (2016) "Mechanical Properties of Clayey Soil Relevant for Clogging Potential," Published Online, International Journal of Geotechnical Engineering (10.1080/19386362.2017.1311086).
  • Yi, Y., Khondoker, M.T.H., Ranjbar, M., and Bayat, A. (2016) "Jacking Force Analysis of Pipe Installation using a Modified Guided Boring Method," ASCE Journal of Pipeline Systems Engineering and Practice, Volume 8, Issue 4.
  • Asefzadeh, A., Hashemian, L., and Bayat, A. (2017) "Characterization of Permament Deformation Behavior of Silty Sand Subgrade Soil under Repeated Load Triaxial Tests," Accepted, Transportation Research Record: Journal of the Transportation Research Board of the National Academies.
  • Shafiee, M., Biswas, S., Tavafzadeh, N., Hashemian, L., Bayat, A. (2017) "Investigation of Thermal-Induced Strains in Flexible Pavements Based on Field Data," Canadian Journal of Civil Engineering, Volume 44, Issue 4, pp. 244–252.
  • Alberto-Hernandez, Y., Kang, C., Yi, Y., and Bayat, A. (2017) "Clogging Potential of Tunnel Boring Machine (TBM): A Review," International Journal of Geotechnical Engineering (10.1080/19386362.2016.1277621).
  • Hasanuzzaman, M., Hashemian, L., Bayat, A. (2016) "Laboratory Investigations of Cold Mix Asphalt for Cold Region Applications," Accepted, ASTM Journal of Testing and Evaluation.
  • Khondoker, M. T. H, Yi, Y., and Bayat, A. (2016) "Subsurface Profiling Using Horizontal Drilling Indices for Guided Boring Method," Published Online, International Journal of Geotechnical Engineering (10.1080/19386362.2016.1257415).
  • Meles, D., Yi, Y., and Bayat, A. (2016) "Performance Evaluation of Highway Embankment Constructed from Tire Derived Aggregate Using Falling Weight Deflectometer Tests," Transportation Infrastructure Geotechnology (10.1007/s40515-016-035-1).
  • Das, S., Bayat, A., Gay, L., Salimi, M., and Matthews, J. (2016) "A Comprehensive Review on the Challenges of CIPP Installations," Accepted, Journal of Water Supply: Research and Technology.
  • Rabiei, M., Yi, Y., Bayat, A. Cheng, R. and Osbak, M. (2016) "Fluidic Drag Estimation in Horizontal Directional Drilling using Finite Volume Method," Published Online, International Journal of Pipeline Engineering (10.1061/(ASCE)PS.1949-1204.0000200).
  • Biswas, S., Hashemian, L., and Bayat, A. (2016) "Investigation on Seasonal Variation of Thermal-Induced Strain in Flexible Pavements Based on Field and Laboratory Measurements," International Journal of Pavement Research and Technology, Volume 9, Issue 5, pp. 354–362.
  • Rostami, A., Yi, Y., Bayat, A. (2016) "Estimation of Maximum Annular Pressure during Horizontal Directional Drilling in Non-Cohesive Soils,” Accepted, ASCE International Journal of Geomechanics.
  • Ngan, K., Yi, Y., Rostami, A. and Bayat, A. (2016) "Estimation of Soil Expansion Force in Static Pipe Bursting: Comparison Between Numerical and Analytical Solutions," Published Online, ASCE International Journal of Geomechanics (10.1061/(ASCE)GM.1943-5622.0000801).
  • Rostami, A., Yi, Y., Bayat, A. and Osbak, M. (2016) "Annular Fluid Pressure Estimation during Pilot Boring in Horizontal Directional Drilling using the Bingham Plastic Flow Model," International Journal of Petroleum Engineering, Volume 2, Issue 2, pp 79-90.
  • Faghih, A., Yi, Y., Bayat, A. and Osbak, M. (2016) "Efficient Drilling in HDD by Implementing the Concept of Specific Energy," Published Online, Geomechanics and Geoengineering: An International Journal (10.1080/17486025.2016.1184762).
  • Asefzadeh, A., Hashemian, L., and Bayat, A. (2016) "Evaluation of Spring Load Restrictions and Winter Weight Premium Methods in Cold Regions according to Field Data," Canadian Journal of Civil Engineering, Volume 42, Issue 7, pp. 667–674.
  • Tavafzadeh, N., Hashemian, L., and Bayat, A. (2016) "The Effect of Insulation Layers on Pavement Strength during Non-Freeze-Thaw Season," Published Online, International Journal of Pavement Engineering (10.1080/10298436.2016.1178741).
  • Biswas, S., Hashemian, L., Hasanuzzaman, M., and Bayat, A. (2016) "A Study on Pothole Repair in Canada through Questionnaire Survey and Laboratory Evaluation of Patching Materials," Canadian Journal of Civil Engineering, Volume 43, Issue 5, pp. 443–450.
  • Yi, Y., Gay, L., Bayat, A. and Ranjbar, M. (2016) "Case Study of Pipeline Installation using a Modified Guided Boring Method," Published Online, ASCE Journal of Pipeline Systems Engineering and Practice, 0501600 (10.1061/(ASCE)PS.1949-1204.0000243).
  • Rostami, A., Yi, Y., Bayat, A. and Osbak, M. (2016) "Predicting the Plan Annular Pressure Using the Power Law Flow Model in Horizontal Directional Drilling," Canadian Journal of Civil Engineering, Volume 43, Issue 3, pp 252-259.
  • Khondoker, M. T. H, Yi, Y., and Bayat, A. (2016) "Comparison of Different Methods for Normal Stress Calculation during Pipe Jacking/Microtunnelling," International Journal of Geotechnical Engineering, Volume 10, Issue 4, pp 366-376.
  • Shafiee, M., Hashemian, L., Asefzadeh, A., and Bayat, A. (2016) "Time-Frequency Domain Analysis of Asphalt Longitudinal Strain," Transportation Research Board (10.3141/2590-07).
  • Tavafzadeh, N., Hashemian, L., and Bayat, A. (2016) "Effects of Seasonal Variation on the Load-Bearing Capacity of Pavements Composed of Insulation Layers," Transportation Research Record: Journal of Transportation Research Board (10.3141/2579-10).
  • Salimi, S., Nassiri, S., and Bayat, A. (2016) "Lateral Coefficient of Friction for Characterizing Winter Road Conditions," Canadian Journal of Civil Engineering, Volume 43, Issue 1, pp. 73–83.
  • Shafiee, M., Asefzadeh, A., Hashemian, L., and Bayat, A. (2016) "Analysis of Loading Frequency in Flixible Pavement Using Fast Fourier Transform," International Journal of Pavement Reserach and Technology, Volume 8, Issue 6, pp. 403–409.
  • Rabiei, M., Yi, Y., Bayat, A. and Cheng, R. (2016) "General Method for Pullback Force Prediction for Polyethylene Pipes in Horizontal Directional Drilling," ASCE Journal of Pipeline System Engineering and Practices, Volume 7. Issue 3, 04016004.
  • Shafiee, M., Hashemian, L., and Bayat, A. (2015) "Seasonal Analysis of Flexible Pavement Response to Falling Weight Deflectometer," International Journal of Pavement Research and Technology, Volume 8, Issue 5, pp. 346–352.
  • Ngan, K., Rostami, A., Yi, Y., and Bayat, A. (2015) "Predicting Soil Expansion Force during Static Pipe Bursting using Cavity Expansion Solutions," ASCE International Journal of Geomechanics, Volume 16, Issue 3, 04015075.
  • Meles, D., Chan, D., Yi, Y., and Bayat, A. (2015) "Finite Element Analysis of Highway Embankment Made from Tire Derived Aggregate," ASCE Journal of Civil Engineering Materials, Volume 28, Issue 2, 04015100.
  • Yi, Y., Meles, D., Nassiri, S., and Bayat, A. (2015) "On the Compressibility of Tire-Derived Aggregate: Comparison of Results from Laboratory and Field Tests," Canadian Geotechnical Journal, Volume 52, Issue 4, pp. 442–458.
  • Faghih, A., Yi, Y., Bayat, A. and Osbak, M. (2015) "Fluidic Drag Estimation in Horizontal Directional Drilling Based on Flow," ASCE Journal of Pipeline System Engineering and Practices, Volume 6, Issue 4, 04015006.
  • Navab, R., Gay, L. and Bayat, A. (2014) "Productivity Improvement of Sewer CCTV Inspection through Time Study and Route Optimization," ASCE Journal of Construction Engineering and Management, Volume 141, Issue 6.
  • Nassiri, S., Salimi, S., and Bayat, A. (2015) "A Survey of Practice and Literature Review on Municipal Road Winter Maintenance in Canada," ASCE Journal of Cold Regions Engineering, Volume 29, Issue 3.
  • Salimi, S., Nassiri, S. and Bayat (2014) "Using Lateral Coefficient of Friction to Evaluate Effectiveness of Plowing and Sanding Operations," Canadian Journal of Civil Engineering, Volume 41, Issue 11, pp 977-985. 
  • Khazraeializadeh, S., Gay, L. and Bayat, A. (2014) "Comparative Analysis of Sewer Physical Condition Grading Protocols for the City of Edmonton," Canadian Journal of Civil Engineering, Volume 41, Issue 9, pp 811-818.
  • Nassiri, S., Shafiee, M.H., Khan, M.R., Bayat, A. (2014) "Evaluation of Variation in Unbound Layers’ Moduli and its Effect on Pavement Design," International Journal of Geotechnical Engineering, Volume 9, Issue 2, pp 140-149.
  • Farkhideh, N., Nassir, S., and Bayat, A. (2014) "Evaluation of accuracy of Wigh-n-Motion systems in Alberta," International Journal of Pavement Reserach and Technology, Volume 7, Issue 3, pp. 169–177.
  • Saha, J., Nassiri, S., Bayat, A., and Soleymani, H. (2014) "Evaluation of the effects of Canadian climate conditions on the MEPDG predictions for flexible pavement performance," International Journal of Pavement Engineering, Volume 15, Issue 5, pp. 392–401.
  • Akbarzadeh, H., Bayat, A. (2012) ''Investigating ASTM F 1962 Arching Factor for Polyethylene Pipes Installed by Horizontal Directional Drilling,'' Journal of Tunneling and Underground Space Technology, Volume 39, pp 50-57.

Submitted

  • Admadian, M., Kang, C., and Bayat, A. (2017) "Study of Environmental Impacts of Trenchless Technologies and Open Cut Methods in Underground New Installation," Canadian Journal of Civil Engineering.
  • Asefzadeh, A., Hashemian, L., and Bayat, A. (2017) "The Effect of Bottom Ash on Soil Suction and Resilient Modulus of Medium Plasticity Clay," Transportation Research Board.
  • Asefzadeh, A., Hashemian, L., and Bayat, A. (2017) "Fatigue Life Evaluation of Pavements Comprised oF Tire Derived Aggregates Embankment," Transportation Research Board.
  • Haghi Tavafzadeh, N., Ahmadian, M., Hashemian, L., and Bayat, A. (2017) Capital Cost Comparison of Pavements Comprised of Insulation Layers - A Case Study in Edmonton - Alberta - Canada," Transportation Research Board.
  • Hashemian, L., Velasco, V., and Bayat, A. (2017) "Laboratory investigation of Pavement Backfilling Materials for Micro-Trenching in Cold Regions," Transportation Research Board.
  • Yi, Y., Kang, C., and Bayat, A. (2017) "Estimation of One-Dimensional Compression of Tire-Derived Aggregate Using a Simple Method," International Journal of Geomechanics (ASCE).
  • Rabiei, M., Yi, Y., and Bayat, A. (2017) "Laboratory Test of Assessing TBM Clogging Potential Evaluating the Performance of Additives," Geotechnical Testing Journal.
  • Kang, C., Yi, Y. and Bayat, A. (2017) "Laboratory Test of Assessing TBM Clogging Potential and Evaluating the Performance of Additives," Geotechnical Testing Journal.
  • Rostami, A., Kang, C., Yi, Y., and Bayat, A. (2016) "Numerical Modelling of the Annular Failure Pressure during HDD in Non-Cohesive Soils," Geomechanics and Geoengineering: An International Journal.
  • Navab-Kashani, R., Gay L. F., and Bayat, A. (2016). "Experimental and Numerical Study on Production Rate in Sewer Mainline Video Inspection," ASCE Journal of Pipeline Systems Engineering and Practice.
  • Vaseli, H., Hashemian, L., Bayat, A. and Gay, L. (2016) "Review and Comparisons of Installation Methods for Fiber Optic Cable Deployment," FACETS Journal.
  • Rabiei, M., Yi, Y., Bayat, A. Cheng, R. and Osbak, M. (2016) "Estimation of Hydrokinetic Pressure and Fluidic Drag Changes during Pipe Installations via HDD Based on Identifying Slurry Flow Pattern Change within Borehole," ASCE Journal of Pipeline Systems Engineering and Practice.
  • Bayat, A., Vaseli, H., Hashemian, L., Gay, L., Williams, I., Mezler, J. (2016) "Productivity Analysis of Micro-Trenching Using Simphony Simulation Modeling," International Journal of Construction Management.

Conference Papers

  • Deng, S., Gao, N., Bayat, A., Osbak, M., and Barr, K. (2018) "Study of the cleaning capacity of drilling fluid in Horizontal Direction Drilling," North American Society of Trenchless Technology (NASTT) Conference, CA, US.
  • Kang, C., Wu, YC., and Bayat, A. (2018) "Initial experimental investigation into clogging potential during tunneling/drilling," North American Society of Trenchless Technology (NASTT) Conference, CA, US.
  • Rostami, A., Deng, S., Yi, Y., Kang, C., and Bayat, A. (2017) "Initial Experimental Study on Formation of Filter Cake in Sand During Horizontal Directional Drilling," 26th North American Society of Trenchless Technology (NASTT) Conference, Washington, DC.
  • Faghih, A., Goerz, B., Taylor, J., Bayat, A., and Martens, M. (2017). "Evaluation of Pipe Stress State Based on Field Measurement during Horizontal Directional Drilling," 26th North American Society for Trenchless Technology Conference, Washington, DC (Submitted)
  • Kang, C., Yi, Y., Bayat, A., Fernando, S. and Hsung, Y. (2016) "Clogging Problem in Tunnel Boring Machine (TBM) Drilling Process," Tunnelling Association of Canada 2016 Annual Conference, Ottawa, ON.
  • Rabiei, M., Yi, Y., Bayat, A., Cheng, R. and Obsbak, M. (2016) "Fluidic Drag Evaluation of Pipes Installed via Horizontal Directional Drilling Using Slot Flow Approximation," 25th North American Society for Trenchless Technology Conference, Dallas, TX.
  • Rostami, A., Yi, Y., Osbak, M. and Bayat, A. (2016) "Investigating Filter Cake Formation on Borehole Stability during Horizontal Directional Drilling in Non-Cohesive Soil," 25th North American Society for Trenchless Technology Conference, Dallas, TX.
  • Hernandez, Y. A. and Bayat, A. (2016) "Appraisal of Clogging and Adhesion of Conditioned Clay in the Laboratory," 25th North American Society for Trenchless Technology Conference, Dallas, TX.
  • Das, S., Navab, R., Gay, L. and Bayat, A. (2015) "Productivity and Cost Analysis of CIPP
    Sewer Main Rehabilitation Projects," 24th North American Society for Trenchless Technology Conference, Denver, CO.
  • Rabiei, M., Yi, Y., Bayat, A.,Cheng, R. and Osbak, M. (2015) "New Method for Predicting Pullback Force for Pipes Installed via Horizontal Directional Drilling (HDD)," 24th North American Society for Trenchless Technology Conference, Denver, CO.
  • Rostami, A., Yi, Y., Bayat, A. and Osbak, M. (2015) "Parametric Study on the Maximum Allowable Pressure of Drilling Fluid During HDD Based on the Cavity Expansion Theory," 24th North American Society for Trenchless Technology Conference, Denver, CO.
  • Murray, C., Rostami, A., Osbak, M., Yi, Y. and Bayat, A. (2014) "Comparison of Bingham Plastic Model with the Power Law Model in Annular Pressure Prediction during Horizontal Directional Drilling," 23rd North American Society for Trenchless Technology Conference, Orlando, FL.
  • Murray, C., Bayat, A. and Osbak, M. (2014) "Elevated Annular Pressure Risk in Horizontal Directional Drilling," 23rd North American Society for Trenchless Technology Conference, Orlando, FL.
  • Rostami, A., Murray, C., Osbak, M. and Bayat, A. (2014) "A Parametric Study of the Rheological Parameters of the Power Law Model," 23rd North American Society for Trenchless Technology Conference, Orlando, FL.
  • Navab, R. and Bayat, A. (2014) "Productivity Improvement of Sewer Mains Televising," 23rd North American Society for Trenchless Technology Conference, Orlando, FL.
  • Ranjbar, M., Bayat, A., Nassiri, S., Fernando, S., Davies, R. and Lueke, J. (2014) "'Eliminator' Experience for Pipeline Installation in the City of Edmonton," 23rd North American Society for Trenchless Technology Conference, Orlando, FL.
  • Ngan, K., and Bayat, A. (2013) "Field Evaluation of Prediction Models for Vertical Ground Movement and Pulling Forces during Pipe Bursting," 22nd North American Society for Trenchless Technology Conference, Sacramento, CA.
  • Khazraeializadeh, S., Bayat, A. (2013) "A Comparative Analysis on Structural Condition Rating Systems Using Three Asset Condition Assessment Protocols," 22nd North American Society for Trenchless Technology Conference, Sacramento, CA.
  • Osbak, M., Murray, C. and Bayat, A. (2013) "The Economics of Risk Absorption and Risk Transfer Strategies in Horizontal Directional Drilling," 22nd North American Society for Trenchless Technology Conference, Sacramento, CA.
  • Osbak, M., Bayat, A. and Murray, C. (2012) "The Impact of Risk in Horizontal Directional Drilling," International Pipeline Conference, Calgary, Alberta [IPC 2012 Best Paper Candidate]
  • Akbarzadeh, H., Bayat, A. (2012) "Impact of Earth Loads on Polyethylene Pipes Installed by Horizontal Directional Drilling," 21st Annual NASTT No-Dig Conference, Nashville, TN.
  • Osbak, M., Akbarzadeh, H., Bayat, A., Murray, C. (2012) "Investigation of Horizontal Directional Drilling Construction Risks," 21st North American Society for Trenchless Technology Conference, Nashville, TN.
  • Akbarzadeh, H., Bayat, A. (2012) "Investigating Soil Arching Over Polyethylene Pipes Installed by Horizontal Directional Drilling," Underground Infrastructure Research (UIR) International Conference and Road Show, Niagara, ON.
  • Murray, C., Osbak, M. and Bayat, A. (2012) "Horizontal Directional Drilling - Construction Risk Management Strategies," ASCE 2013 Pipeline Conference, Fort Worth, TX.

Other

Technical Reports

  • Razaei, M., Hashemian, L., and Bayat, A. (2017) "Blackfalds/Wetaskiwan Project Report." Research Report. Prepared for: TELUS Communications.
  • Meles, D., Yi, Y., Nassiri, S., and Bayat, A., (2015) "Evaluation of application of tire derived aggregate for highway embankment." Research Report. Alberta Recycling, Edmonton, Canada.
  • Navab, R., Gay, L., and Bayat, A. (2014) "Review of the City of Edmonton’s Sewer Physical Condition Classification Manual (SPCCM)," Prepared for: City of Edmonton, Edmonton, AB.

  • Vaseli, H., Gay, L., and Bayat, A. (2013) "A Literature Review for Alternative Fiber Optic Installation Methods," Prepared for: TELUS, Edmonton, AB.
  • Vaseli, H., Gay, L., and Bayat, A. (2013) "Micro-Trenching Field Installation Report," Prepared for: TELUS, Edmonton, AB.

Non-Refereed Contributions

  • Vaseli, H. and Bayat, A. (2015) "Application of Microtrenching for Fiber to the Home," Poster Presentation at Edmonton Section of the Canadian Society for Civil Engineering (CSCE), Edmonton, AB. [Won Poster Award]
  • Ranjbar, M., Yi, Yaolin and Bayat, A. (2014) "Pipeline Installation Using Eliminator," 2015 NASTT NW Chapter Magazine.
  • Rabiei, M. and Bayat, A. (2015) "Mudflow Pattern during Pullback of Horizontal Directional Drilling Pipe Installation," NASTT NW Chapter Conference, Edmonton, AB.
  • Rostami, A. and Bayat, A. (2015) "Parametric Study on the Maximum Allowable Pressure of Drilling Fluid during HDD Based on the Cavity Expansion Theory," Poster Presented at 2015 NASTT No-Dig Show, Denver, CO.
  • Rabiei, M., Yi, Y., Bayat, A., Cheng, R. and Osbak, M. (2015) "New Method for Predicting Pullback Force for Pipes Installed via HDD," Poster Presented at 2015 NASTT No-Dig Show, Denver, CO.
  • Faghih, A. and Bayat, A. (2014), "Consideration of Fluidic Drag in HDD," Poster Presented at 2014 NASTT No-Dig Show, Orlando, FL. [Won Poster Award]

  • Faghih, A. and Bayat, A. (2014), "Fluidic Drag Estimation in HDD based on Annular Flow Equations," Aurora-Edmonton Section of the Association for the Advancement of Cost Engineering (AACE), Edmonton, AB.

  • Rostami, A., Bayat, A. and Osbak, M. (2013), "Sensitivity Analysis on the Constitutive Parameters of the Power Law Model," 2013 NASTT- Northwest Chapter Conference, Calgary, AB.
  • Osbak, M., Murray, C. and Bayat, A. (2012), "Investigation of HDD Construction Risks," 2012 NASTT- Northwest Chapter Conference, Edmonton, AB.

  • Bayat, A. (2011), "Design Tools for HDD Construction," 2010 NASTT- Northwest Chapter Conference, Edmonton, AB.

Magazine Features

  • Ranjbar, M., Yi, Y., Bayat, A. (2015) "Pipeline Installation Using the Eliminator in Edmonton, Alberta," 2015 NASTT NW Chapter Magazine.
  • Rostami, A., Yi, Yaolin., Bayat, A. and Osbak, M. (2014) "Drilling Fluid Management During Horizontal Directional Drilling," 2014 Horizontal Directional Drilling Guide
  • Osbak, M., Murray, C. and Bayat, A. (2012) "Investigation of HDD Construction Risks," NASTT's Trenchless Today (selected as Outstanding Technical Paper)